8.9. Dismantling of the distributor of ignition

We remove the distributor (see. "Removal of the distributor of ignition").

We remove a distributor rotor (see. "Removal of a rotor of the distributor of ignition"). We remove contact group (see. "Check and adjustment of a gap between contacts of the breaker").

The Shlitsevy screw-driver we unscrew the screw of fastening of an arm of the condenser to the distributor case...

... also we remove the condenser.

To thin small beards we beat out a pin of fastening of a maslootrazhatel...

... also we remove from the roller a maslootrazhatel and a washer.

We take out the roller from the distributor case.

Having hooked the thin screw-driver, we remove a lock washer of draft of the vacuum regulator of an advancing of ignition.

By the Shlitsevy screw-driver it is turned off two screws of fastening of the vacuum regulator of an advancing of ignition.

We hook the screw-driver draft of the vacuum regulator...

... also we remove the vacuum regulator.

By the Shlitsevy screw-driver it is turned off two screws of holders of the bearing of a mobile plate of contacts of the breaker.

The screw located from a distributor cover clamp fixed also a tip of a wire of "lot" of contacts of the breaker.

We take out a mobile plate together with the bearing.

We assemble the ignition distributor in the return sequence.