8.3. Removal of a cover of the distributor of ignition

Carefully, not to damage tips of wires, we take out high-voltage wires from cover nests.

We release two spring latches of fastening of a cover...

... also we uncover.

For replacement of a piece of coal (the sprung contact) of the central electrode we turn a piece of coal counterclockwise...

... also we take out it together with a spring from a cover nest.

We separate a spring and a piece of coal.

We establish an ignition distributor cover in the return sequence. At the same time...

... the groove of a cover is combined...

... with the plastic clamp installed in the distributor case.

We insert high-voltage wires into cover nests according to the numbering of cylinders put on a cover.