7.3. Removal of a cover and rotor of the distributor of ignition

We take out the central high-voltage wire from a distributor cover...

... and other wires.

We release two spring clips of fastening of a cover...

... also we uncover the distributor case.

For replacement of the sprung piece of coal of the central electrode we turn a piece of coal counterclockwise...

... also we take out it together with a spring from a cover nest.

We remove a rotor from the distributor roller.

The rotor is established on the roller only in one situation: a spring plate in a rotor nest - to a roller lyska. We establish a cover and a rotor of the distributor in the return sequence. We connect high-voltage wires to a cover according to the numbering of cylinders put on a cover.