5.10. Removal of a cable of the drive of the air gate of the carburetor

We remove the case of the air filter (see. "Removal of the case of the air filter").

Holding a key "on 7" a lug of the lever of the drive of the air gate of the carburetor, the shlitsevy screw-driver we unscrew the screw fixing a cable.

Key "on 8" we weaken a bolt of fastening of the level holding a cable cover.

We take out a cable from an opening in a lever lug.

In salon by the crosswise screw-driver it is turned off two self-tapping screws of fastening of the panel of the control unit to the lower part of the dashboard.

Having turned the panel, by passatizha it is hooked a locking bracket of a tip of a cable.

We remove a locking bracket.

We stretch a cable through openings of a body and the panel of the control unit.

We remove a cable.

We establish a cable in the return sequence. At completely "drowned" handle the air gate has to be completely open. If necessary we adjust the drive movement of a cable at the weakened screw of its fastening.