3.3. Replacement of laying of a cover of a head of the block of cylinders

We remove the case of the air filter (see. "Removal of the case of the air filter"). We disconnect a cable of the drive of the air gate from the carburetor (see. "Removal of a cable of the drive of the air gate of the carburetor"). We disconnect from the carburetor and an arm of a cover of a head of the block of cylinders a cable of the drive of butterfly valves (see. "Removal of a cable of the drive of butterfly valves of the carburetor").

Head "on 10" we turn off eight nuts of fastening of a cover of a head of the block of cylinders.

We remove from a forward left hairpin of fastening of a cover an arm with a fuel hose.

We remove eight clamping washers of a cover from hairpins of a head of the block of cylinders.

We uncover heads of the block of cylinders.

We remove laying of a cover.

We establish new laying and the removed details in the return sequence. We tighten nuts of fastening of a cover in the order shown in fig. 1.

Fig. 1. Order of an inhaling of nuts of fastening of a cover of a head of the block of cylinders