3.2. Oil replacement

We change oil on completely heated-up engine. Work is carried out on the elevator or a viewing ditch.

The stopper of a drain opening of the pallet of a case of the engine is located near a back cross-piece of a stretcher. That to turn off it, a working part of a regular six-sided key "on 12" for "Classical" engines VAZ should be reduced by 13-20 mm.

We turn off a case pallet stopper...

... also we merge oil in capacity not less than 4 l.

We merge oil within about 10 minutes and we wrap a drain stopper.

The stripper turned off an oil filter...

... also we remove it from the union.

We oil laying of the new filter engine, navorachivay and we tighten the filter on the union of the block of cylinders of the engine manually on 3/4 turns from the moment of contact of laying with the block of cylinders.

For oil filling...

... we uncover a maslozalivny mouth.

We fill in oil.

For control of amount of the filled-in oil...

... we take the oil level probe index from the directing tube.

Oil level on the probe has to be between tags of "min" and "max".

We launch the engine. When the control lamp of pressure of oil upon dashboards goes out, we stop the engine. We double-check the level of oil and if necessary we add.