3.11. Replacement of a back epiploon of a bent shaft

We perform work on the elevator or a viewing ditch.

We remove a casing and the conducted clutch plate (see. "Replacement of a casing and the conducted clutch plate on the car a sdvigatel of VAZ-2106").

We roll a bolt of fastening of the transmission in a carving opening of the block of cylinders of the engine.

Holding a flywheel from a provorachivaniye the assembly shovel implanted between teeths of its wreath and leaning on the screwed bolt a head "on 17" we turn off six bolts of fastening of a flywheel to a flange of a bent shaft.

We remove a plate.

... and flywheel.

Head "on 10" we turn off two nuts of mortgage bolts of fastening of a cover of a case of coupling...

... also we uncover.

Having hooked the screw-driver...

... we take a back epiploon of a bent shaft from its cover.

We oil a working edge of a new epiploon engine...

... also we press an epiploon, using old as a mandrel.

We establish the removed details in the return sequence.