3.10. Replacement of a forward epiploon of a bent shaft

We perform work on a viewing ditch or the elevator.

We remove an engine mudguard (see. "Removal of a mudguard of the engine").

Having included the 1st transfer and having slowed down the car the parking brake...

... a key "on 38" we turn off a nut of fastening of a pulley of a bent shaft.

We take off a belt of the drive of the pump of cooling liquid (see. "Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine").

Assembly shovel we shift a pulley from a sock of a bent shaft...

... also we remove a pulley.

The screw-driver hooked a forward epiploon of a bent shaft...

... also we take it from a nest in a camshaft drive cover.

We oil engine a working edge of a new epiploon...

... also we press it a face head (or a pipe piece) suitable diameter.

We establish a pulley of a bent shaft in the return sequence, having oriented it so that the spline on a sock of a bent shaft entered a pulley groove.