22.8. Removal of the lock of a door of a cap and its drives

For descriptive reasons operations are shown on the removed door.

Key "on 8" we turn off the bolt connecting parts of draft of the lock.

By the Shlitsevy screw-driver it is turned off four screws of fastening of the lock.

We remove the lock and we disconnect from it draft.

Passatizhami is taken out a latch.

By the Shlitsevy screw-driver it is turned off two screws of fastening of a level.

We remove a level.

We remove the dvuplechy lever with drafts from the shaft of the handle having square section.

By the Shlitsevy screw-driver it is turned off two screws of fastening of the handle.

We remove the handle, a pro-rate and laying.

We establish the removed elements in the return sequence.

The drive of locks is adjusted by the bolts connecting parts of drafts (are shown on a photo 1).