19.8.4. Removal and dismantling of the generator 58.3701

We disconnect a wire of "weight" from the rechargeable battery.

Cap key "on 13" we turn off a bolt of fastening of the generator to an adjusting level.

This bolt fixes at the same time and a wire of "weight" from the rechargeable battery to the engine.

We take out a bolt and we take away a wire of "weight" from the generator.

We disconnect the lower fastening of the generator and we take off a belt of its drive (see. "Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331").

Having turned the generator a pulley towards the engine, we disconnect a wire from conclusion "Ш" of the generator (see. "Removal of brush knot and regulator of tension of the generator 58.3701")...

... and a key "on 10" we turn off a conclusion nut "+". We remove tips of wires from a conclusion "+" the generator.

We take out the generator from a motor compartment.

We remove brush knot and the regulator of tension (see. "Removal of brush knot and regulator of tension of the generator 58.3701").

Holding a generator rotor from a provorachivaniye a hexagon "on 8", we turn off a key "on 24" a nut of fastening of a pulley.

We remove a nut, a spring washer, a pulley and a krylchatka from a generator rotor shaft.

By the Shlitsevy screw-driver it is turned off four coupling screws of covers of the generator.

Further operations on dismantling of the generator 58.3701 are almost similar to the corresponding operations on dismantling of the generator 37.3701 (see. "Removal and dismantling of the generator 37.3701"). We collect and install the generator on the car in the return sequence.