19.5. Removal of the switch of ignition

We disconnect a wire of "weight" from the rechargeable battery. We remove casings of a steering column (see. "Understeering switch"). Understeering switches and a steering wheel can be not removed (on a photo they are removed for descriptive reasons).

We separate blocks of plaits of wires of the switch of ignition.

Key "on 10" we turn off two bolts of fastening of the switch of ignition if their heads are not cut off at installation.

If heads of bolts are cut off, we weaken their inhaling a chisel and we turn off passatizham.

We remove the switch of ignition and a bracket of its fastening.

By the Shlitsevy screw-driver it is turned off two screws of fastening of contact group of the switch of ignition...

... we remove it from the case...

... also we disconnect an overlay of the switch of ignition from contact group.

At assembly of the switch of ignition of a pro-point on an internal surface of contact group we combine with ledges on the switch case. We install the ignition switch in the return sequence. If necessary we break heads of fixing bolts.