18.3. Replacement of front brake shoes

We hang out and remove a forward wheel.

Chisel we unbend edges of a lock plate of the lower bolt of fastening of a support with the cylinder to the directing finger.

Cap key "on 13" we turn off the lower bolt.

On an ear of the brake cylinder the fillet interfering a provorachivaniye of a hexagon of the directing finger is executed. If the finger is turned...

... we hold it the screw-driver, having inserted it between a hexagon and a fillet.

We take out a bolt with a lock plate.

By assembly shovel it is hooked and we raise a support...

... turning it with the cylinder around an axis of the top directing finger.

We take out brake shoes.

Before installation of new blocks it is necessary to drown the piston in the brake cylinder.

For this purpose it is possible to use sliding passatizha (and also a big clamp, an alligator wrench)...

... or an assembly shovel, having implanted it into a support window between the piston and a brake disk.

We establish brake shoes in the return sequence. Do not forget to zakontrit a bolt of fastening of a support with the cylinder to the directing finger, and before departure press several times a brake pedal to bring blocks to a disk.