17.6. Removal of an external tip of steering draft

Work is carried out for replacement of a tip.

We hang out and remove a wheel. We turn a wheel against the stop to the left when replacing the right tip and vice versa.

Passatizhami we take out the forelock...

... and a cap key "on 17" we turn off a nut of fastening of a tip to the lever of a rotary fist.

Stripper we press off a tip finger from the lever of a rotary fist.

It is possible to use a bifurcate stripper.

In the absence of strippers we turn off a nut of fastening of a finger not up to the end.

We implant an assembly shovel a vraspor between a steering rod end and the lever of a rotary fist.

Wringing out an assembly shovel a tip down, we strike with the hammer blows to a lever end face.

We take out a tip finger from the lever of a rotary fist.

Rozhkov a key "on 22" raskontrivay a nut, holding a tip of steering draft from a provorachivaniye for ledges Rozhkov a key "on 24".

Including carving rounds, we turn off a tip.

The new tip is established in the return sequence, wrapping it on the same quantity of rounds. At the same time the corner of a convergence of wheels of the car will change a little, but its small deviation will allow to reach under the own steam the place of adjustment which after this work is obligatory.