16.6. Removal of a cross bar

We perform work on a viewing ditch or the elevator.

Cap key "on 19" we turn off a nut of a bolt of fastening of a bar to a body arm, holding a bolt from a provorachivaniye a key "on 17".

Through a drift from soft metal we beat out a bolt...

... also we take out it.

We bring a tip of a cross bar out of a body arm.

Cap key "on 19" we turn off a nut of a bolt of fastening of a bar to an arm of a beam of the back bridge, holding a bolt from a provorachivaniye a key of the same dimension.

We take out a bolt and we remove a cross bar.

If the bolt is not taken out, we push out it an assembly shovel, implanting it between an end face of a bolt and a beam of the back bridge.

We establish a bar in the return sequence. Nuts of bolts of fastening of a bar are finally tightened in situation "the car on wheels".