12.5. Removal of the drive of a speedometer

Work is carried out on a viewing ditch or the elevator.

On the car with a mechanical speedometer the flexible shaft is disconnected from a reducer of its drive (see. "Removal of a flexible shaft of the drive of a speedometer").

If the car is completed with a combination of devices with an electronic speedometer, then the speed sensor is attached to a reducer of its drive.

We disconnect the socket from the sensor.

Rozhkov a key "on 10" we turn off a nut of a hairpin of fastening of a reducer of the drive of a speedometer to a transmission case...

... also we remove a speedometer drive reducer.

If for removal of a reducer there is not enough place in a floor tunnel, we establish an adjustable emphasis under a transmission case, we disconnect a cross-piece of a back support of the power unit from body arms (see. "Removal of support of the power unit on the car with the VAZ-2106 engine"). Having a little lowered the transmission on an emphasis...

... a piece of a pipe or an assembly shovel we wring out the transmission to the right and we remove a reducer.

We establish knots and details in the return sequence. We oil a sealing ring of the drive gearbox.