12.4. Replacement of an epiploon of a secondary shaft

Work is carried out on a viewing ditch or the elevator. We remove the driveshaft (see. "Removal of cardan transfer").

We remove the rubber aligning ring.

We stop a flange from a provorachivaniye, having inserted a bolt of fastening of the elastic coupling into its opening.

Head "on 30" we turn off a nut of fastening of a flange...

... also we remove it (the nut is established on carving sealant).

We remove a washer (it is established by the convex party to a nut).

We remove a flange a three-gripping stripper (for descriptive reasons the photo is made on the dismantled box).

The flange can also be brought down by means of a long drift from soft metal.

We remove a flange.

Having hooked the screw-driver an epiploon of a secondary shaft...

... we remove it.

Having greased a working surface of an epiploon with a thin layer of Litol-24 lubricant, we press its suitable piece pipes. We establish the removed details and knots in the return sequence.