11.3. Replacement of an epiploon of a secondary shaft

We perform work on a viewing ditch or the elevator.

We remove cardan transfer and a sealant of shliyets of a shaft of the forward driveshaft from a nut of fastening of a flange of the elastic coupling (see. "Removal of cardan transfer").

By nippers it is unclenched a lock ring, we hook the screw-driver...

... also we remove it.

To small beards we unbend edges of a lock washer.

Key "on 30" we turn off a nut of fastening of a flange of the elastic coupling, pressing at the same time the aligning ring of a flange of the forward driveshaft. We hold a flange of the elastic coupling from a provorachivaniye an assembly shovel for hairpins.

We remove the aligning ring...

... nut of fastening of a flange...

... lock washer...

... and flange.

If removal of a flange is complicated, we press it a stripper.

Having hooked the screw-driver an epiploon of a secondary shaft...

... we take out it.

Having greased a working surface of an alnik with a thin layer of Litol-24 lubricant...

... we press it a tool head of the suitable size (a pipe piece).

We establish the dismantled details upside-down. We tighten a nut of fastening of a flange of the elastic coupling the ordered moment (see. "Appendix").

On a shaft of a secondary shaft of the transmission napressovyvay the aligning ring (see. "Removal of cardan transfer").