10:10. Removal of the mechanism of the drive of switching off of coupling on the car with the engine UEPA-331

We remove the transmission together with a coupling case (see. "Replacement of a casing and the conducted clutch plate on the car with the engine UEPA-331").

We remove a coupling switching off drive fork cover.

We bring the ends of a spring out of openings of a fork and a holder of the bearing...

... also we remove a spring.

We remove the coupling switching off bearing.

Having shifted a fork outside of a coupling case, we remove it from a spherical support...

... also we remove in a coupling case.

By the crosswise screw-driver it is turned off three screws of fastening of the directing plug of the bearing of switching off of coupling to a case.

We remove the directing plug.

We establish knots and details of the drive of switching off of coupling in the return sequence, having greased the external surface of the directing plug of the bearing and a spherical support of a fork with SHRUS-4 lubricant.